3D Printing

PLA or ABS

Most of the parts can be printed in either PLA or ABS. Some of the parts require support material to print properly; these are listed in the table below. A set of parts are printed in transparent material to diffuse the NeoPixel LED rings. We've found removing support material with ABS is easier than PLA.

3D Parts List

The parts below are grouped and separated. The first batch require support material and can be printed in any color of choice. The second batch doesn't require support and can print "as-is". The third batch should be printed in transparent material, whether that it'd be PLA, Nylon or PET+.

body-left
body-right
handle-bottom
handle-top

240c(ext) / 190c(bed)
2 Shells
10% Infill
90/120 Speeds
Support Material On

barrel-left
barrel-right
barrel-sight
body-ammo-left
body-ammo-right
body-sight-left
body-sight-right
body-speaker-cap

240c(ext) / 190c(bed)
2 Shells
10% Infill
90/120 Speeds
Support Material Off

body-diffuser
guage
disks-right
disks-left
body-ammo-left
body-ammo-right
neoring-mount

PLA Transparent 240c
2 Shells
10% Infill
90/120 Speeds
Support Material Off

Customize Design

The original solids are available to download and modify using Autodesk 123D Design. The project file includes modeled electronic components for reusing in other 3D printed projects. 

This guide was first published on Nov 04, 2014. It was last updated on Nov 04, 2014.
This page (3D Printing) was last updated on Aug 04, 2020.