Adafruit 16-Channel 12-bit PWM/Servo Driver with I2C interface
You want to make a cool robot, maybe a hexapod walker, or maybe just a piece of art with a lot of moving parts. Or maybe you want to drive a lot of LEDs with precise PWM output. Then...
Out of Stock
Micro servo with three pin cable
Tiny little servo can rotate approximately 180 degrees (90 in each direction) and works just like the standard kinds you're used to but smaller. You can use any servo...
$5.95
In Stock
Laser Diode module with two wires
You have some frickin' sharks at your lair, and you're thinking "it would be really great if I could attach some lasers to them" and then you see these little laser...
$5.95
In Stock
Miniature WiFi USB Module
Make your Internet of Things device cable-free by adding WiFi. Take advantage of the Raspberry Pi and Beagle Bone's USB port to add a low cost, but high-reliability wireless link....
Discontinued
Angled shot of assembled Adafruit Assembled Pi Cobbler Breakout on a populated breadboard connected to a Raspberry Pi A via a GPIO ribbon cable.
Now that you've finally got your hands on a Raspberry PiĀ® Model B , you're probably itching to make some fun embedded computer...
Discontinued
Smallish table-vise with adjustable jaws and universal joint
The best mini-vise for working on smaller PCBs (2.875" or less in one dimension)! The jaws are strong plastic that wont damage the PCB and doesn't mind if you hit it with the...
$37.50
In Stock