A template is available to construct a mounting plate for this project. The files are available for download below.

  • mountingBoard_v1.f3z
  • mountingBoard_v1.dxf
  • mountingBoard_v1.svg
  • mountingBoardWithOutlines_v1.dxf
  • mountingBoardWithOutlines_v1.svg
  • vidSynthMountingBoard.stl

Template Ideas

There are a few different ways that you can use this template.

  • You can print or cut it out of paper and use it as a guide to drill mounting holes on your favorite material (cardboard, acrylic, wood, etc).
  • You can use it for laser cutting
  • If your 3D printer is large enough, you can 3D print the .STL file

This guide was first published on Mar 29, 2022. It was last updated on 2022-03-29 22:34:39 -0400.

This page (Constructing the Mounting Plate) was last updated on Mar 29, 2022.

Text editor powered by tinymce.