Featured Products

Adafruit LoRa Radio Bonnet with OLED - RFM95W @ 915MHz

PRODUCT ID: 4074
The latest Raspberry Pi computers come with WiFi and Bluetooth, and now you can add even more radio options with the Adafruit Radio Bonnets! Upgrade your Raspberry Pi with a LoRa /...
$32.50
IN STOCK

Adafruit LoRa Radio Bonnet RFM96W @ 433MHz

PRODUCT ID: 4075
The latest Raspberry Pi computers come with WiFi and Bluetooth, and now you can add even more radio options with the Adafruit Radio Bonnets! Upgrade your Raspberry Pi with a LoRa /...
$32.50
IN STOCK

Adafruit RFM95W LoRa Radio Transceiver Breakout - 868 or 915 MHz

PRODUCT ID: 3072
"You see, wire telegraph is a kind of a very, very long cat.  You pull his tail in New York and his head is meowing in Los Angeles.  Do you understand this? And...
$19.95
IN STOCK

Raspberry Pi Zero W

PRODUCT ID: 3400
If you didn't think that the Raspberry Pi Zero could possibly get any better, then boy do we have a pleasant surprise for you! The new Raspberry Pi Zero W...
$10.00
IN STOCK

Raspberry Pi 3 - Model B+ - 1.4GHz Cortex-A53 with 1GB RAM

PRODUCT ID: 3775
The Raspberry Pi 3 Model B is the most popular Raspberry Pi computer made, and the Pi Foundation knows you can always make a good thing better! And what could make the Pi 3...
$35.00
IN STOCK

900Mhz Antenna Kit - For LoPy, LoRa, etc

PRODUCT ID: 3340
This LoRa Antenna Kit is meant for use with the LoPy LoRa, WiFi and BLE board or the SiPy Sigfox,...
$12.75
IN STOCK

Assembled Pi T-Cobbler Plus - GPIO Breakout

PRODUCT ID: 2028
This is the assembled version of the Pi T-Cobbler Plus.  It only works with the Raspberry Pi Model Zero, A+, B+, Pi 2,Pi 3! (Any Pi with 2x20 connector)
$7.95
IN STOCK

Monochrome 128x32 I2C OLED graphic display

PRODUCT ID: 931
These displays are small, only about 1" diagonal, but very readable due to the high contrast of an OLED display. This display is made of 128x32 individual white OLED pixels, each...
$17.50
OUT OF STOCK

Tactile Switch Buttons (12mm square, 6mm tall) x 10 pack

PRODUCT ID: 1119
Medium-sized clicky momentary switches are standard input "buttons" on electronic projects. These work best in a PCB but
$2.50
IN STOCK

Full sized breadboard

PRODUCT ID: 239
This is a 'full-size' breadboard, 830 tie points. Good for small and medium projects. It's 2.2" x 7" (5.5 cm x 17 cm) with a standard double-strip in the middle...
$5.95
IN STOCK

Breadboarding wire bundle

PRODUCT ID: 153
75 flexible stranded core wires with stiff ends molded on in red, orange, yellow, green, blue, brown, black and white. These are a major improvement over the "box of bent...
$4.95
IN STOCK

uFL SMT Antenna Connector

PRODUCT ID: 1661
uFL connectors are very small surface-mount parts used when an external RF antena is desired but a big bulky SMA connector takes up too much space. We use this part on our GPS and WiFi...
$0.75
IN STOCK

8GB SD Card w/ Stretch Lite

PRODUCT ID: 2820
This is a 8GB microSDHC card that comes with a SD adapter and is pre-programmed to contain...
$9.95
IN STOCK

5V 2.5A Switching Power Supply with 20AWG MicroUSB Cable

PRODUCT ID: 1995
Our all-in-one 5V 2.5 Amp + MicroUSB cable power adapter is the perfect choice for powering single-board computers like Raspberry Pi, BeagleBone or anything else that's power...
$7.50
OUT OF STOCK