The following hardware is used in this project.
- Raspberry Pi (we suggest the latest which at this time is a Raspberry Pi 3)
- 32x32 RGB LED Matrix Panel - 6mm pitch. You can use any 'pitch' for higher/lower density display!
- Adafruit RGB Matrix HAT + RTC for Raspberry Pi - Mini Kit
- 5V 2A or 5V 4A power supply - Make sure the LED Matrix HAT has its own power supply.
You can also get just about eveything you need in our Time Square Pi Pack!
Assemble the Pi HAT
Follow the Adafruit assembly guide for the RGB LED matrix Pi HAT, then come back here once all the pieces are soldered up