Installing PCB MountGet the PCB mount ready to secure the Raspberry Pi Pico. Use the following screws.
|
|
Secure Pico to PCB MountCarefully place the Raspberry Pi Pico over the M2 standoffs that are secured to the PCB mount. Use the 4x M2 x 4mm long screws to secure the Raspberry Pi Pico to the four M2 standoffs. |
|
Connect USB Extension Cable to PicoGrab the USB extension cable and connect it to the microUSB port on the Raspberry Pi Pico. It's important to connect these together before securing the PCB mount to the top cover. |
|
Screws for Securing PCB mount to Top CoverUse the following screws to secure the PCB mount to the top cover.
|
|
Secure PCB Mount to Top CoverPosition the PCB mount in place and line up the M3 standoffs with the mounting holes in the top cover. While holding in place, insert and fasten the 4x M3x4mm long screws to secure the PCB mount to the top cover. |
|
Secured PCB MountCheck the PCB mount is properly secured to the top cover. |
Install PCB Mount
This guide was first published on Mar 10, 2021. It was last updated on 2021-03-10 12:36:29 -0500.
This page (Install PCB Mount) was last updated on Apr 10, 2021.
Text editor powered by tinymce.