Install Rubber Nub for 5-Way Nav Switch

Before panel mounting the 5-way navigation switch, install the rubber nubbin for the Joystick (if you'd like, it's optional). It is press fitted over the stem of the joystick and has a snug fit. 

Screws for 5-Way Nav Switch

Install the 5-way navigation switch into the top cover. Line up the mounting tabes with the built-in standoffs on the top cover. Use the following screws to secure the 5-way navigation switch.

  • 2x M3 x 4mm screws

Secure 5-Way Nav Switch

Insert and fasten the two M3 x 4mm screws through the mounting tabs on the PCBs.

This guide was first published on Mar 10, 2021. It was last updated on Mar 28, 2024.

This page (Install 5-Way Nav Switch) was last updated on Mar 08, 2024.

Text editor powered by tinymce.