Secure USB Extension Cable

The USB extension cable is panel mounted to the side of the frame. Use the screws included or use your own (mine are coated in black paint).

  • M3 x 10mm long screws

Hold the USB extension port in place with your desired orientation. Insert and fasten the two M3 screws while holding the USB port in place.

The stock length of the USB extension cable is just the right length we need – No need to cut or extend, yay!

Close Case

The top cover snap fits onto the frame. Bring the two together and line up the clips with the edges of the frame. Firmly press them together to snap fit the case shut.

Final Build

And there you have it! Your DIY MIDI Controller is assembled and ready for jamming. Congratulations!

This guide was first published on Mar 10, 2021. It was last updated on Jun 11, 2024.

This page (Final Assembly) was last updated on Mar 08, 2024.

Text editor powered by tinymce.