Parts List

STL files for 3D printing are oriented to print "as-is" on FDM style machines. Parts are designed to 3D print without any support material. Original design source may be downloaded using the links below.

Pico Lego Plate

  • Pico-Lego-Base-split

Pico Case

  • pico-case-top
  • pico-case-btm

Pico Case small

  • pico-case-small

 

Slicing Parts

No supports are required. Slice with setting for PLA material. 

The parts were sliced using CURA using the slice settings below.

  • PLA filament 220c extruder
  • 0.2 layer height
  • 10% gyroid infill
  • 60mm/s print speed
  • 60c heated bed

Glue Lego Plate

The Lego Plate parts are joined together with super glue.

Be extremely cautious using strong glues, read and follow directions and wear eye protection.

Filament Change

The grid effects are created by swapping the filament colors from white to black. The script is located under:

Extensions > Post Processing > Modify G-Code

then under:

Add script, add the Filament Change Script

The color change should happen on layer 6

This guide was first published on Feb 10, 2021. It was last updated on Feb 10, 2021.

This page (3D Printing) was last updated on Feb 09, 2021.

Text editor powered by tinymce.