Parts List

STL files for 3D printing are oriented to print "as-is" on FDM style machines. Parts are designed to 3D print without any support material. Original design source may be downloaded using the links below.

• pcb-mount.stl
• front-frame.stl
• front-cover.stl
• back-frame.stl
• back-cover.stl

CAD Assembly

The Pi HQ camera is secured to the PCB mount using M2.5 hardware screws and standoffs. The Pi 4 is secured to the PCB using M2.5 screws. The PCB mount is secured to the back frame with screws and nuts. The front frame is snap fitted onto the back frame. The front and back covers snap fit onto the frames respectively.

Slicing Parts

No supports are required. Slice with settings for PLA material. 

The parts were sliced using CURA using the slice settings below.

• PLA filament 220c extruder
• 0.2 layer height
• 10% gyroid infill
• 60mm/s print speed
• 60c heated bed