DIY HQ Camera

In this project we’re making a case for the Raspberry Pi HQ Camera. This 3D printed an enclosure that houses the Pi 4 and the HQ Camera module. It’s compatible with any C or CS-mount lenses so we can use a wide variety of interchangeable lenses.

Easy/Fast 3D Print

The parts can be 3d printed without any support material using PLA. The case is modular and features snap fit covers that are easy to remove and swap out. The PCB mount is designed to secure the camera to the Pi and can be printed in just about 20 minutes.

Snap Fit & Modular

With snap fit parts you can customize the case to fit a number of different sensors and components. All of the ports and connectors are accessible so you can connect all sorts of devices like a display, mouse and keyboard.

This guide only covers the assembly of the enclosure. Please visit the links below to learn how setup the Raspberry Pi HQ camera module

Parts

List of parts used to build this project. There are a few options for the USB Type A connector and a rechargeable USB battery.

Angled shot of Raspberry Pi 4
NOTE: Due to stock limitations we may only be able to offer refunds or store credit for Pis that are defective, damaged or lost in transit.The Raspberry Pi...
Out of Stock
Top view of Raspberry Pi HQ camera module.
Snap, snap! There's a new official camera board released by the Raspberry Pi Foundation!The Raspberry Pi High Quality Camera is the latest camera accessory...
$50.00
In Stock
Angled shot of Flex Cable for Raspberry Pi Camera or Display - 100mm / 4"
This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera (either 'classic' or 'NoIR' type) or Raspberry Pi Display for a different...
$1.95
In Stock
16mm 10MP Telephoto Lens for Raspberry Pi HQ Camera
This is the 16mm 10MP Telephoto Lens, an essential for the Raspberry Pi High Quality Camera. It has a wide...
$50.00
In Stock
6mm 3MP Wide Angle Lens for Raspberry Pi HQ Camera
This is the 6mm Wide Angle Lens, an add-on for the Raspberry Pi High Quality Camera. It has a wide field...
$25.00
In Stock
Angled shot of Official Raspberry Pi Power Supply 5.1V 3A with USB C with Power plug facing down.
The official Raspberry Pi USB-C power supply is here! And of course, we have 'em in classic Adafruit black! Superfast with just the right amount of cable length to get your Pi 4...
$7.95
In Stock
Micro HDMI to HDMI Cable - 2 meter
Connect an HDMI device with a micro HDMI port to one with a regular size HDMI port together with this basic HDMI cable. It has nice molded grips for easy installation, and is 2 meter...
$8.95
In Stock
Black Nylon Screw and Stand-off Set with M2.5 Threads, kit box
Totaling 380 pieces, this M2.5 Screw Set is a must-have for your workstation. You'll have enough screws, nuts, and hex standoffs to fuel your maker...
$16.95
In Stock
4 x M2.5 8mm Screw
Longer screw needed not included in kit
1 x 35mm F1.6 Lens C mount
Lens shown in photos

This guide was first published on Jun 05, 2020. It was last updated on Jun 05, 2020.

This page (Overview) was last updated on Aug 15, 2022.

Text editor powered by tinymce.