The Power Over Ethernet connector is interfering with my HAT/Bonnet/etc.

The PoE connector and the main GPIO header connector are the same height. So in most cases, you should be OK. But if you are finding you want some extra space between them, you can use a socket riser (PID 4079). Add that in between the Pi and the HAT/Bonnet for some extra head room.

This guide was first published on Mar 13, 2019. It was last updated on Mar 13, 2019.

This page (FAQ) was last updated on Jun 21, 2021.

Text editor powered by tinymce.