Parts List

STL files for 3D printing are oriented to print "as-is" on FDM style machines. Parts are designed to 3D print without any support material. Original design source may be downloaded using the links below.

  • buzz-button-top
  • buzz-button-mid
  • buzz-button-btm
  • CPX-Case-lid
  • CPX-Case
  • CPX-Case-btm

Slicing Parts

The parts were sliced using CURA using the slice settings below.

  • Natural PLA filament 220c extruder
  • 0.2 layer height
  • 10% gyroid infill
  • 60mm/s print speed
  • 60c heated bed

Supports

  • Support Extrusion Width: .2
  • Support Density: 4%
  • Support Z Height: .21
  • Interface: Off
  • Support Roof: On
  • Support Pattern: Zig Zag
  • Support Roof Pattern: Zig Zag

Build Plate Adhesion 

  • Type: Brim
  • Line Count: 6
  • Brim on inside + outside

This guide was first published on Jun 22, 2021. It was last updated on 2021-06-22 16:57:35 -0400.

This page (3D Printing) was last updated on Jun 02, 2022.

Text editor powered by tinymce.