Build a Jeopardy-like Game Show Buzzer with a Circuit Playground Bluefruit!

The first player to press their buzzer will illuminate the Host controller with the color of the buzzer handle!

You can even enable Bluetooth button presses to a computer or mobile device!

The code is written in CircuitPython, so it's easy to change the sound effects, colors and button presses! 


Components are housed in the Host Case with access to the USB port.


3D Printed

The parts are 3D Printed with an easy to assemble snap fit parts and print with minimal supports.

shot of a Black woman's neon-green manicured hand holding up a Circuit Playground Bluefruit glowing rainbow LEDs.
Circuit Playground Bluefruit is our third board in the Circuit Playground series, another step towards a perfect introduction to electronics and programming. We've...
Close up angled shot of a LED strip attached and powered by a circuit playground.
You have a Circuit Playground Express, and want to connect some wires to it for adding LEDs or sensors or speakers? You can use our...
Top view of a black speaker breakout board connected to a round microcontroller via alligator clips. A music note animation emits from the speaker.
Hey, have you heard the good news? With Adafruit STEMMA boards you can easily and safely plug sensors and devices together, like this Adafruit STEMMA Speaker - Plug and Play...
Video of 30mm translucent clear LED arcade button flashing on and off.
A button is a button, and a switch is a switch, but these translucent arcade buttons are in a class of their own. Particularly because they have LEDs built right...
Angled shot of ten 20 cm long quick-connect wire pairs.
Quick connector wire sets will make wiring up our arcade-style or metal buttons quicky-quick. Each wire comes as a 'pair' with two 0.11" quick-connects pre-crimped onto...
Angled shot of 16mm red panel mount pushbutton.
OK, this item is pretty simple - it's a panel mount pushbutton. It's not that exciting, no LEDs, no bells & whistles. But we really like it anyways – look at that...
Angled shot of bundle of Premium Silicone Covered Extension Jumper Wires - 200mm x 40
These premium extension jumper wires are handy for making wire harnesses or jumpering between headers on PCBs. They're 200mm (~7.8") long and come loose as a pack of...

This guide was first published on Jun 22, 2021. It was last updated on May 20, 2024.

This page (Overview) was last updated on Mar 08, 2024.

Text editor powered by tinymce.