Prepare the header strip:Cut the strip to length if necessary. It will be easier to solder if you insert it into a breadboard - long pins down |
|
Add the breakout board:Place the breakout board over the pins so that the short pins poke through the breakout pads |
|
And Solder!Be sure to solder all 12 pins for reliable electrical contact. |
|
You're done! Check your solder joints visually and continue onto the next steps |
Assembly
This guide was first published on Mar 05, 2021. It was last updated on 2021-03-05 17:17:51 -0500.
This page (Assembly) was last updated on Mar 31, 2021.
Text editor powered by tinymce.