Works with WipperSnapper

If you have one of the following boards, you can immediately get started using the WipperSnapper beta.


Home is where the heart's also where we keep all our electronic bits. So why not wire it up with sensors and actuators to turn our house into an electronic wonderland....
What's Metro shaped and has an ESP32-S2 WiFi module? What has a STEMMA QT connector for I2C devices, and a Lipoly charger circuit? What has your favorite Espressif WiFi...
The Adafruit MagTag combines the new ESP32-S2 wireless module and a 2.9" grayscale E-Ink display to make a low-power IoT display that can show data on its screen even when power...


Aww yeah, it's the Feather you have been waiting for! The HUZZAH32 is our ESP32-based Feather, made with the official WROOM32 module. We packed everything you love...

SAMD51 ("M4")

Give your next project a lift with AirLift - our witty name for the ESP32 co-processor that graces this Metro M4. You already know about the Adafruit Metro...
PyPortal, our easy-to-use IoT device that allows you to create all the things for the “Internet of Things” in minutes. Make custom touch screen interface...
The development board I own is not on this list

We're actively developing Adafruit IO Wippersnapper and will be adding new boards over time. Follow the Adafruit Blog and @AdafruitIO on Twitter to keep updated.

Can I add a new development board to Wippersnapper

Our goal is to allow people to contribute their boards to Adafruit IO WipperSnapper. We're still building out a process for this and will have steps for it in the future.

Updating WipperSnapper

Adafruit WipperSnapper is in active development. To avoid encountering bugs or problems with WipperSnapper, you'll want to keep the firmware on your WipperSnapper device up-to-date 

When you visit the WipperSnapper device list or the WipperSnapper device page, you'll notice the WipperSnapper device has a badge indicating the device's firmware version. When we release a new WipperSnapper firmware version, the badge will have an x next to the version number and appear red.

To update WipperSnapper - download the latest version of WipperSnapper for your board and follow the installation steps for your hardware.

This guide was first published on Sep 27, 2021. It was last updated on Sep 27, 2021.

This page (Installing WipperSnapper) was last updated on Oct 15, 2021.

Text editor powered by tinymce.