The sushi conveyor belt may be assembled with 3D printed parts, described below. It is a remix of the Sushi Go Nigiri Box model by mderoxtro.
The case has two parts: a nigiri sushi-shaped lid and a rice ball-shaped box. The nigiri sushi needs to be printed with supports.
The STL files can be downloaded directly here or from Printables.
The nigiri sushi lid needs supports to print properly. You can change the orientation of the piece to stand vertically on its longest side. This results in the fewest amount of supports generated and a nicer layer finish on the top.
Page last edited March 08, 2024
Text editor powered by tinymce.