Prep SD breakout

Use an 8 pin matching cable pair to easily connect the SD breakout board to the pins on the Qualia board. 

Mount SD to Lid

Use 2.5x5mm screws to secure the breakout to the lid part.

Mount display

Take note of how the ribbon cable attaches to the Qualia board. Align the display to the cutout and place face down between the walls inside the case. 

Slightly bend the case while gently pressing the edges of the display to fit. 

Mounting The Frame

Align cutout on the mounting frame to the ribbon cable

Slide the mounting frame into the case at an angle, between the snaps on the case.

Attach The Buttons

Align buttons to the cutouts on the case.

Mount The Qualia Board

Use four M2.5x5mm screws to attach the Qualia board to the standoffs on the frame. 

Connect the display and SD cables to the Qualia board. 

Attach The Lid

Align the snaps on the lid to the snaps on the case to press fit together.