0

How To Use

by lady ada
adafruit_products_1652plush_LRG.jpg
Using the Qualia display is super easy, similar to any other monitor you've used. You will need a 9 or 12V DC power supply that can provide at least 1000mA (1A) of current, a DisplayPort cable and a computer with a DisplayPort

Read the sections to learn all about your new miniature monitor!
adafruit_products_retinadisplay.jpg
ASSEMBLY DISPLAYPORT CONNECTION
Last updated on 2015-05-04 at 04.27.56 PM Published on 2014-02-13 at 01.03.45 PM

RELATED GUIDES

Affordable HAL 9000 Replica
Why yes, Dave. As a matter of fact I CAN do that.
by Phillip Burgess
WIth the right Adafruit parts and a little crafting ingenuity, you can make a pretty decent replica of HAL 9000 to decorate your workshop or hackerspace.
Wireless Inductive Power Night Light
Nikola Tesla approved!
by Tyler Cooper
Create your own night light that harnesses the power of wireless energy. Change the brightness of the light by moving it away from the power module.
Adafruit DPI Display Kippah
Add a TTL display to your Raspberry Pi without an HDMI decoder
by lady ada
A TFT panel connected to a Raspberry Pi without the use of an HDMI decoder? What is this sorcery??? It's the DPI Kippah from Adafruit! This HAT-like board snaps onto a Raspberry Pi B+, A+ or Pi 2 Model B and with a little software configuration, allows you to have what normally would go out the HDMI port come up on a nice little flat screen.
FEATURED
Ladyada's Learn Arduino - Lesson #0
Hi There!
by lady ada
If you're here, it's because you want to learn how to build and make stuff with electronics! And, you're in luck: there's never been a better time.