Mount Qualia to frame

Peel the protective film off of the display.

Use M2.5 x 5mm screws to fasten the board to the printed frame part.

Flip the frame to the back of the display.

Fit the Flexible Buttons

Align the flexible buttons to the three cutouts on the case.

Place Display

Carefully slide the display between the nubs inside the case.

Gently press the frame over the nubs inside the case.

Align the Buttons

Hold the Qualia board from the sides to gently align the buttons to the printed buttons.

Attach the Lid

Align the snaps inside the case to lid and press fit into place.