Build an enclosure for displays powered by the Adafruit Qualia ESP32-S3.
The 3D printed mounts hold the Qualia board in place with access to the USB port and built in buttons!
Designs for additional displays will be included as they are completed, stay tuned for more!
For info on how to set up the displays, click the link below.
4" Round Display
This massive 4" diagonal-sized display has 720x720 16-bit full-color pixels! The board mounts to a printed frame that press fits inside the case.
3.4 Touch Display
The 3.4" square display has 480x48018-bit full-color pixels and is an IPS display, so the color looks great up to 80 degrees off-axis in any direction
The board mounts to a printed frame that press fits inside the case.
Flexible Buttons
Use flexible material to make the buttons accessible.
There's a few things everyone loves: ice cream, kittens, and honkin' large TFT screens. We're no strangers to small TFT's -
$19.95
In Stock
This is a screen for advanced hackers who like the look of a nice, round TFT screen with tons of pixels. This massive 4" diagonal-sized display has 720x720 16-bit full-color...
$54.95
In Stock
This is a screen for advanced hackers who like the look of a square TFT screen with tons of pixels. The 3.4" square display has 480x48018-bit full-color pixels and is...
$39.95
In Stock
This cable is not only super-fashionable, with a woven pink and purple Blinka-like pattern, it's also made for USB C for our modernized breakout boards, Feathers, and...
$2.95
In Stock
A smaller-sized rechargeable battery pack for your Raspberry Pi or Raspberry...
$14.95
In Stock
4 x
M2.5x5mm Screws
M2.5x5mm Screws
