First we'll connect the electronics before we add the code and build the box.

  • On the back of the PyPortal, connect one JST cable to D4 and the other to D3.
  • Next connect the ground and data breadboard cables from the JST connector to the arcade button quick connect wire pairs. Orientation will not matter.
  • Lastly connect the quick connect pairs to buttons. Make sure to keep track which color button corresponds to which input on the PyPortal (D4 vsD3)

This guide was first published on Jul 17, 2019. It was last updated on Dec 08, 2023.

This page (Connect Electronics) was last updated on Jul 11, 2019.

Text editor powered by tinymce.