3D Printed Case for PyPortals
This project is like a mini desktop PC that you can have on your desk and display all sorts of data. The ports are accessible on the side and there’s even a spot to hold a speaker.
The 3D printed enclosure is designed to snap fit so it’s easy to assemble and take apart.
The Whole PyPortal Family
These cases are designed for the new line of PyPortals. The PyPortal original, PyPortal Titano and PyPortal Pynt.
Titano, Pynt and Original
Each PyPortal has it's own size so we designed a case for each one. The enclosures are very similar in design so they have the same assembly. This learn guide will walk through 3D printing and installing the PyPortal.
Open Case Design
The case features extra for more components. The front and back covers are designed to pop open so the PyPortal is accessible for connecting more sensors and components.
PRODUCT ID: 4116
PyPortal, our easy-to-use IoT device that allows you to create all the things for the “Internet of Things” in minutes. Make custom touch screen interface...
PRODUCT ID: 4465
The PyPortal Pynt is the little sister to our popular PyPortal - zapped with a shrink ray to take the design...
PRODUCT ID: 4444
The PyPortal Titano is the big sister to our popular PyPortal now with twice as many pixels! The PyPortal...
PRODUCT ID: 4111
This cable is not only super-fashionable, with a woven pink and purple Blinka-like pattern, it's also fully reversible! That's right, you will save seconds a day by...
PRODUCT ID: 3923
Hear the good news! This wee speaker is a great addition to any audio project where you need 8 ohm impedance and 1W or less of power. We particularly like...
PRODUCT ID: 550
Keep your electronics from going barefoot, give them little rubber feet! These small sticky bumpers are our favorite accessory for any electronic kit or device. They are sticky, but...
This guide was first published on Jan 08, 2020. It was last updated on Jan 08, 2020.
This page (Overview) was last updated on Aug 07, 2020.