3D Printed Case for PyPortalsThis project is like a mini desktop PC that you can have on your desk and display all sorts of data. The ports are accessible on the side and there’s even a spot to hold a speaker. The 3D printed enclosure is designed to snap fit so it’s easy to assemble and take apart. |
|
The Whole PyPortal FamilyThese cases are designed for the new line of PyPortals. The PyPortal original, PyPortal Titano and PyPortal Pynt. |
|
Titano, Pynt and OriginalEach PyPortal has it's own size so we designed a case for each one. The enclosures are very similar in design so they have the same assembly. This learn guide will walk through 3D printing and installing the PyPortal. |
|
Open Case DesignThe case features extra for more components. The front and back covers are designed to pop open so the PyPortal is accessible for connecting more sensors and components. |
Overview
PyPortal, our easy-to-use IoT device that allows you to create all the things for the “Internet of Things” in minutes. Make custom touch screen interface...
$54.95
In Stock
The PyPortal Pynt is the little sister to our popular PyPortal - zapped with a shrink ray to take the design...
$44.95
In Stock
The PyPortal Titano is the big sister to our popular PyPortal now with twice as many pixels! The PyPortal...
$59.95
In Stock
This cable is not only super-fashionable, with a woven pink and purple Blinka-like pattern, it's also fully reversible! That's right, you will save seconds a day by...
$3.95
In Stock
Hear the good news! This wee speaker is a great addition to any audio project where you need 8 ohm impedance and 1W or less of power. We particularly like...
$1.95
In Stock
Keep your electronics from going barefoot, give them little rubber feet! These small sticky bumpers are our favorite accessory for any electronic kit or device. They are sticky, but...
$0.95
In Stock
This guide was first published on Jan 08, 2020. It was last updated on Jan 08, 2020.
This page (Overview) was last updated on Jan 23, 2021.