Parts List

STL files for 3D printing are oriented to print "as-is" on FDM style machines. Parts are designed to 3D print without any support material. Original design source may be downloaded using the links below.

  • frame.stl
  • screen-cover.stl
  • pcb-plate.stl

CAD Assembly

The PyPortal is secured to the PCB plate using M2.5 hardware screws and standoffs. The screen cover is press fitted over the PyPortal's display. The PCB plate is secured to the frame using M2.5 hardware screws and hex nuts. The speaker is press fitted into the holder in the center of the PCB plate.

Slicing Parts

No supports are required. Slice with settings for PLA material. 

The parts were sliced using CURA using the slice settings below.

  • PLA filament 220c extruder
  • 0.2 layer height
  • 10% gyroid infill
  • 60mm/s print speed
  • 60c heated bed

Design Source Files

The project assembly was designed in Fusion 360. This can be downloaded in different formats like STEP, STL and more. Electronic components like Adafruit's board, displays, connectors and more can be downloaded from the Adafruit CAD parts GitHub Repo.

This guide was first published on Jun 09, 2020. It was last updated on Jun 09, 2020.

This page (3D Printing) was last updated on Dec 08, 2021.

Text editor powered by tinymce.