CircuitPython Power!

Build a simple Guitar Tuner with CircuitPython and Adafruit PyPortal! Use the touch screen to tap on tuning pegs and play music notes. The notes are pre-recorded wav audio files of guitar strings. The graphic of the head stock is a single bitmap. This uses the displayio library for CircuitPython and can be customized to make a unique sound board.

3D Printed PyPortal Case

The Adafruit PyPortal and a mini oval speaker are secured to a 3D printed enclosure using M2.5 screws and standoffs. The PyPortal is mounted vertically and features a built-in holder for a speaker.

Parts

Adafruit PyPortal - CircuitPython Powered Internet Display

PRODUCT ID: 4116
PyPortal, our easy-to-use IoT device that allows you to create all the things for the “Internet of Things” in minutes. Make custom touch screen interface...
$54.95
IN STOCK

Mini Oval Speaker - 8 Ohm 1 Watt

PRODUCT ID: 3923
Hear the good news! This wee speaker is a great addition to any audio project where you need 8 ohm impedance and 1W or less of power. We particularly like...
OUT OF STOCK

Fully Reversible Pink/Purple USB A to micro B Cable - 1m long

PRODUCT ID: 4111
This cable is not only super-fashionable, with a woven pink and purple Blinka-like pattern, it's also fully reversible! That's right, you will save seconds a day by...
$3.95
IN STOCK

Black Nylon Screw and Stand-off Set – M2.5 Thread

PRODUCT ID: 3299
Totaling 380 pieces, this M2.5 Screw Set is a must-have for your workstation. You'll have enough screws, nuts, and hex standoffs to fuel your maker...
$16.95
IN STOCK
This guide was first published on Jun 09, 2020. It was last updated on Jun 09, 2020.
This page (Overview) was last updated on Jun 18, 2020.