You can get started instantly with these UF2's - doubleclick Reset to put your board into BOOT mode, and drag these UF2 files over!
If you are using SD card storage, make a directory called gifs on the SD card and put your GIFs in there
If you are using QSPI storage, and at some point you had CircuitPython loaded, use a USB cable, click reset to have it show up as a disk drive. Make a directory called gifs on the SD card and put your GIFs in there. If you've never loaded CircuitPython, check the Loading GIFs page up ahead.
For boards that have both SD and QSPI storage, the gif player will default to SD if its found, and if not, fall back to QSPI
Page last edited March 08, 2024
Text editor powered by tinymce.