Snap Fit Enclosure

This enclosure is designed to secure the PyGamer PCB without any hardware screws. The PCB rests on bottom half with built-in standoffs. The top half features cutouts for the thumb stick, buttons and display. The two halves snap fit together and clamp shut. Features on the edges of the snap allow the case to firmly stay shut but also allow it to re-open.

Accessible Ports

The case features a notch near the top to allow access to the various ports on the PyGamer. There's access to the following ports.

  • MicroUSB port
  • MicroSD card slot
  • Reset button
  • Audio jack

Case In Hand

The case features a 1mm chamfer on the top and bottom edges to allow for comfort. The bottom fillets follow the contour of the rounded edges on the PyGamer PCB. The case measures in at just 12.8mm thick, making it slim, and it fits well in your pocket.


You can get the PyGamer Starter Kit or order the parts you want:

Adafruit PyGamer Starter Kit with PCB, enclosure, buttons, and storage bag
Please note: you may get a royal blue or purple case with your starter kit (they're both lovely colors)What fits in your pocket, is fully Open...
In Stock
Angled shot of Adafruit PyGamer for MakeCode Arcade, CircuitPython or Arduino.
What fits in your pocket, is fully Open Source, and can run CircuitPython, MakeCode Arcade or Arduino games you write yourself? That's right, it's the Adafruit...
In Stock
Angled shot of 10 plastic button caps colored reddish-orange, yellow, white, and black.
These Reese's Piece's lookin' bits fit perfectly on top of tactile buttons with 2.4mm square tops and give a satisfying 8mm diameter surface area for your fingers to...
Out of Stock
Mini Oval Speaker with Short Wires
Hear the good news! This wee speaker is a great addition to any audio project where you need 8 ohm impedance and 1W or less of power. We particularly like...
In Stock
Lithium Ion Polymer Battery 3.7v 350mAh with JST 2-PH connector and short cable
Lithium-ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, light, and powerful. The output ranges from 4.2V when completely charged to 3.7V. This...
In Stock
Fully Reversible Pink/Purple USB A to micro B Cable
This cable is not only super-fashionable, with a woven pink and purple Blinka-like pattern, it's also fully reversible! That's right, you will save seconds a day by...
In Stock
1 x Starbond Super Glue
EM-150 Medium

Prerequisite Guides

If you're new to soldering and CircuitPython, we suggest you walk through the following guides to get the basics. 

This guide was first published on Jun 12, 2019. It was last updated on Jun 12, 2019.

This page (Overview) was last updated on Jun 12, 2019.

Text editor powered by tinymce.