Whether it's the soundtrack for your workout or a mix for your sweetheart, you can turn your PyGamer into a standalone MP3 player with JEplayer.
This guide will take you through the steps of assembling the PyGamer case, installing CircuitPython and JEplayer, adding your music and art, and then using the player itself.
Installing or upgrading CircuitPython
You should ensure you have CircuitPython 7.3.3 or greater on your board. Plug your board in with a known good data + power cable (not the cheesy USB cable that comes with USB power packs, they are power only). You should see a new flash drive pop up.
If the drive is CIRCUITPY, then open the boot_out.txt file to ensure the version number is 7.3.3 or greater.
Adafruit CircuitPython 7.3.3 on 2022-08-29; Adafruit PyGamer with samd51j19
If you need to install or upgrade CircuitPython, see this guide page on the pygamer.
