3D Printed Parts

STL files for 3D printing are oriented to print "as-is" on FDM style machines. Parts are designed to 3D print without any support material. Original design source may be downloaded using the links below.

Screen Bezel

A bezel will help protect the display by keeping it affixed to the PCB. It can be attached to the cover using super glue.

Attach Bezel to Cover

Apply super glue along the rim of the bezel. Be cautious not to apply too much or too little super glue. Place the cover onto the bezel in the correct orientation.

Secured Bezel

Allow the glue to fully set before handling or installing. Avoid leaving parts on surfaces to prevent stains from fumes and hazing.

This guide was first published on Apr 24, 2020. It was last updated on Mar 08, 2024.

This page (3D Printing) was last updated on Mar 08, 2024.

Text editor powered by tinymce.