Mini Thermal Camera

Build a mini thermal imaging camera with Adafruit PyBadge and MLX90640 IR Thermal Camera breakout. Record and analyze images for revealing the heat in circuits, machines and even humans!

PyBadge & MLX90640

The IR thermal camera sensor uses the STEMMA QT connection so it easily plugs into the Adafruit PyBadge.

An external slide switch is used to power the circuit on and off. A metal ball button is used for reset.

A 3.7V 320mAh battery connects directly making this a portable project with rechargeable USB.

Prerequisite Guide

This learn guide covers the 3D printing of the enclosure and assembly only. Follow the learn guides below to get the PyBadge board setup with code.

Parts

1 x PyBadge
Feather Compatible Dev Board
1 x MLX90640 Breakout
IR Thermal Camera
1 x 420mAh Battery
3.7V Lipoly
1 x Slide Switch
Breadboard Friendly
1 x Metal Ball Button
6mm x 10 pack
1 x Stemma Cable
4-pin jST PH to JST SH cable
1 x Tripod Screw
3/8" to 1/4" screw adapter
1 x Mini Tripod
Portable folding desktop stand
1 x M2.5 Hardware
M2.5 Screw and Nut Kit – 4x M2.5 x 16mm
Angled shot of a Adafruit PyBadge for MakeCode Arcade, CircuitPython, or Arduino.
What's the size of a credit card and can run CircuitPython, MakeCode Arcade or Arduino? That's right, its the Adafruit PyBadge! We wanted to see how much we...
Out of Stock
Angled shot of 4-pin JST PH to JST SH Cable.
Are you a maker in the midst of a STEMMA dilemma? This 200mm long 4-wire...
$0.95
In Stock
10 wire Silicone Cover Stranded-Core Ribbon Cable
For those who are fans of our silicone-covered wires, but are always looking to up their wiring game. We now have Silicone Cover Ribbon cables! These may look...
$3.95
In Stock
Angled shot of a Adafruit MLX90640 IR Thermal Camera Breakout.
You can now add affordable heat-vision to your project and with an Adafruit MLX90640 Thermal Camera Breakout. This sensor contains a 24x32 array of IR thermal sensors. When connected...
$74.95
In Stock
Lithium Ion Polymer Battery 3.7v 420mAh with JST 2-PH connector and short cable
Lithium-ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, light, and powerful. The output ranges from 4.2V when completely charged to 3.7V. This...
$6.95
In Stock
Breadboard-friendly SPDT Slide Switch
These nice switches are perfect for use with breadboard and perfboard projects. They have 0.1" spacing and snap in nicely into a solderless breadboard. They're easy to switch...
$0.95
In Stock
Angled closeup of single 6mm metal ball tactile button.
Add some steely elegance to your project with these Metal Ball Tactile Buttons. They've got a nice industrial shine to them along with a light blue...
$5.95
In Stock
Camera and Tripod 3/8 to 1/4 Adapter Screw
Whaddya got a screw loose or something?This 3/8" to 1/4" Adapter Screw is super handy if you're building projects that...
$1.50
In Stock

This guide was first published on Apr 24, 2020. It was last updated on Apr 24, 2020.

This page (Overview) was last updated on Aug 06, 2022.

Text editor powered by tinymce.