In this project, we’re making GamePads for the Adafruit PyBadge.
PyBadge is great for conferences but it also makes a really nice gaming device!
You can make gaming sessions more comfortable with a 3D printed thumbpad and buttons!
The case is designed to house a bigger 3d printed thumbpad and buttons. You can even use flexible filaments for a softer touch with a bit more grip.
We designed three difference cases for the back of the PyBadge to fit the header version and the PyBadge LC model. The PyBadge LC is a lot more slimmer without the headers and connectors.
A third version of the case includes cutouts to connect FeatherWings!
PRODUCT ID: 4200
What's the size of a credit card and can run CircuitPython, MakeCode Arcade or Arduino? That's right, its the Adafruit PyBadge! We wanted to see how much we...
PRODUCT ID: 3939
What's the size of a credit card and can run CircuitPython, MakeCode Arcade or Arduino even when you're on a budget? That's right, it's the Adafruit...
PRODUCT ID: 4237
Lithium ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, light and powerful. The output ranges from 4.2V when completely charged to 3.7V. This battery...
PRODUCT ID: 3923
Hear the good news! This wee speaker is a great addition to any audio project where you need 8 ohm impedance and 1W or less of power. We particularly like...
PRODUCT ID: 4148
This cable is super-fashionable with a woven pink and purple Blinka-like pattern!First let's talk about the cover and over-molding. We got these in custom colors,...
This guide was first published on Jun 24, 2019. It was last updated on Jun 24, 2019.
This page (Overview) was last updated on May 04, 2020.