PyBadge

In this project we’re making a case for the Adafruit PyBadge. This 3d printed case is designed for a lanyard so you can use it as a conference badge. 

The case is 3d printed in translucent PLA and does not require any support material. A little actuator fits inside the case so you can easily trigger the reset button. The PCB press fits nicely and doesn’t require any hardware screws. The top cover features cutouts for the display and all the buttons.

MakeCode Arcade

MakeCode Arcade is a block based editor for programming your own games. It’s designed for beginners and features tutorials so you can customize them or build your own. The built-in tools like the sprite editor, let you easily create assets and animations.

The Adafruit PyBadge pairs with MakeCode so you can program and upload yours games over USB. With MakeCode Arcade, you can build platforms, side-scrollers, shooters and puzzle type games.

MakeCode Arcade Guides

Use the learn guides linked below to get started with game developement using Microsoft MakeCode Arcade.

Angled shot of a Adafruit PyBadge for MakeCode Arcade, CircuitPython, or Arduino.
What's the size of a credit card and can run CircuitPython, MakeCode Arcade or Arduino? That's right, its the Adafruit PyBadge! We wanted to see how much we...
$34.95
In Stock
Angled Shot of Adafruit PyBadge - Low Cost.
What's the size of a credit card and can run CircuitPython, MakeCode Arcade or Arduino even when you're on a budget? That's right, it's the Adafruit...
$29.95
In Stock
Slim Lithium Ion Polymer Battery 3.7v 400mAh with JST 2-PH connector and short cable
Lithium-ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, light, and powerful. The output ranges from 4.2V when completely charged to 3.7V. This...
Out of Stock
Pink lanyard with Adafruit characters and metal hooks at ends
We've got our Circuit Playground friends on lunchboxes, 
$1.95
In Stock
Mini Oval Speaker with pico blade connector
Hear the good news! This wee speaker is a great addition to any audio project where you need 8 ohm impedance and 1W or less of power. We particularly like...
Out of Stock
Filament for 3D printers in various colors and types stacked together.
Having a 3D printer without filament is sort of like having a regular printer without paper or ink.  And while a lot of printers come with some filament there's a good chance...
Out of Stock

This guide was first published on May 14, 2019. It was last updated on Mar 28, 2024.

This page (Overview) was last updated on Mar 08, 2024.

Text editor powered by tinymce.