PyBadge & TensorFlow Lite
3D print a case with a flip out mic! This case is designed for the TensorFlow Lite Kit. Use the Adafruit PyBadge, battery and microphone to build a machine learning project!
This embedded content is from a site (www.youtube.com, flickr.com, etc) that does not comply with the Do Not Track (DNT) setting now enabled on your browser.
Clicking through to the embedded content will allow you to be tracked by the embed provider.
Prerequisite Guides
This guide covers the wiring and assembly. Walk through the following learn guide to get the software setup on your PyBadge.
The TensorFlow Lite for microcontroller kit includes the following
Additional Parts
Machine learning has come to the 'edge' - small microcontrollers that can run a very miniature version of TensorFlow Lite to do ML computations. But you don't...
guides with product
Out of Stock
Hear the good news! This wee speaker is a great addition to any audio project where you need 8 ohm impedance and 1W or less of power. We particularly like...
$1.95
In Stock
Having a 3D printer without filament is sort of like having a regular printer without paper or ink. And while a lot of printers come with some filament there's a good chance...
Out of Stock
Are you still looking for that perfect PCB holder? The low profile PCB Stickvise might be just the thing you need!In performing the simple task...
$37.50
In Stock
This silicone mat is made of thick rubber and can take just about anything you throw at it. It's stable, strong, non-slip, non-conductive and heat-resistant surface for your...
$9.95
In Stock
Text editor powered by tinymce.
