Circuit Diagram

The diagram below provides a visual reference for wiring of the components. They aren't true to scale, but are meant to be used as a reference. This diagrams was created using Fritzing software.

Adafruit Library for Fritzing

Use Adafruit's Fritzing parts library to create circuit diagrams for your projects. Download the library or just grab the individual parts. Get the library and parts from GitHub Adafruit Fritzing Parts.

Wired Connections

The STEMMA Speaker needs three wired connections. Reference the circuit diagram and follow the colored wired to properly connect the STEMMA speaker to the Circuit Playground Bluefruit.

  • Black wire from STEMMA Speaker to GND on CPB
  • White wire from STEMMA Speaker to A0 on CPB
  • Red wire from STEMMA Speaker to VOUT on CPB

Battery Toggle Switch

The 500mah battery is connected to a toggle switch via a 2-pin JST cable. The voltage (red) wire is connected in-line with the toggle switch. Use the middle pin and either the left or right pins. This allows the power to be turned on and off.

This guide was first published on Oct 28, 2019. It was last updated on Mar 26, 2024.

This page (Circuit Diagram) was last updated on Mar 08, 2024.

Text editor powered by tinymce.