Gamepad Display

Ever wish you could attach a mini display to your PS4 gamepad? With 3D printing, you totally can! This 3D printed mount attaches a 7" HDMI 1200x800 display to a Playstation 4 DualShock wireless controller. 

3D Printed Display Mount

With some hardware and a tripod screw you can securely mount the display to the gamepad. It features a sturdy hinge so you can adjust the viewing angle. This uses a standard 1/4"-20 tripod screw allowing a wide range of mounting options.

Hardware Screws

The following hardware is required to assemble this project. Note a "Go Pro" bolt is an M5-0.8 metric screw. A standard tripod screw is 1/4-20 (ANSI unified screw thread).

1 x DualShock Playstation 4 Gamepad
Wireless Controller for PS4
1 x 1/4-20 D-Ring Screw
1/4-20 Tripod Screw
1 x M5 x 20mm Screw (50pc)
Metric M5 x 20mm long socket head cap (GoPro Bolt)
1 x M5 Hex Nut
M5 x 0.8mm Metric Hex Nut (50pc)
1 x M3 x 8mm Screw
M3 x 0.6mm button head screw assortment kit (300pc)
1 x M3 Hex Nut (50pc)
M3 Hex Nut
Yes, this is an adorable small HDMI television with incredibly high resolution and built in 3W stereo speakers! We tried to get the smallest possible HDMI/VGA display with...
Out of Stock
Yes, this is an adorable small HDMI television with incredibly high resolution! We tried to get the smallest possible HDMI/VGA display with high-res, high-contrast visibility. The...
$159.95
In Stock
Connect a device with a Mini HDMI port to a regular sized HDMI port together with this basic HDMI cable. It has nice molded grips for easy installation, and is 1.5 meter long...
Out of Stock

This guide was first published on May 05, 2020. It was last updated on May 05, 2020.

This page (Overview) was last updated on Oct 25, 2020.