You have a stepper motor, but you need to attach it to your CNC project, eh? Not so easy if you don't have a stepper motor mount just like this fine one here! This mount will fit any NEMA-17 motor (with 31mm hole spacing) with four screws. There are two 30mm long slots, 30mm apart so you can easily attach it. Made of steel with welded 90-degree support triangles, its got a solid constructionComes with one mount and a bag of hardware for attachment:4 x 34mm long M4 Pan head4 x M4 washer + lock (spring) washer + hexnut4 x 9mm long M4 Pan...