This remote can be reconfigured in the code to work however you want.  Here's how I did it:

Note:  The STOP/MODE button will turn all the LEDs off, but it does not turn the Pro Trinket off.  If you leave your staff in this mode, without pressing your On/Off switch, your battery will slowly drain. Always use the power switch at the end of the staff to fully power off.

To charge your staff, just plug a USB cable into the Pro Trinket.

This guide was first published on Aug 25, 2015. It was last updated on Aug 25, 2015.

This page (Using the Remote) was last updated on Oct 15, 2021.

Text editor powered by tinymce.