The Raspberry Pi 5 Active Cooler is compatible with the Raspberry Pi 5 and the Raspberry Pi 5 Case. Designed for anyone who wants to push the performance of their...

Raspberry Pi Touch Display 2 is the sequel to the popular Raspberry Pi Official Display. Like the original, it's a 7′′ touchscreen display for Raspberry Pi. Unlike the original, it has a much higher...

"'There is one who may claim it by right. For this assuredly is the palantír of Orthanc from the treasury of Elendil, set here by the Kings of Gondor. Now my hour draws near. I will take it.'" –Aragorn II ElessarThis...

The DRV2605 from TI is a fancy little motor driver. Rather than controlling a stepper motor or DC motor, its designed specifically for controlling haptic motors - buzzers and vibration motors. Normally one would just turn those kinds of motors on and off, but this driver has...

The only thing better than a nice mechanical key, is one that also can glow any color of the rainbow - and that's what the Adafruit NeoKey Breakout will let you do! This little 0.75" x 0.85" PCB can fit one Cherry MX or compatible switch and make...

OK, this item is pretty simple - it's a panel mount pushbutton. It's not that exciting, no LEDs, no bells & whistles. But we really like it anyways – look at that lovely rounded shape, that elegant bevel. If you're going to go with a momentary pushbutton, let it be this...

For crafting your very own custom keyboard, a Kailh Blue Linear mechanical key switches is deeee-luxe! With smooth actuation and Cherry MX compatibility, they're lovely when you want a clicky tactile keystroke with a snappy feel and an...

Dress up your mechanical keys in your favorite colors with a wide selection of gumdrop-like, retro, curvy, and stylish MA profile keycaps. Here is a 5 pack of Cyan MA Keycaps for your next mechanical keyboard or 

*BZZZZZZZZZZ* Feel that? That's your little buzzing motor, and for any haptic feedback project you'll want to pick up a few of them. These vibe motors are tiny discs, completely sealed up so they're easy to use and embed.Two wires are used to control/power the vibe....

This 4-wire cable is a little over 150mm / 6" long and fitted with JST-SH female 4-pin connectors on one end and premium female headers on the other. Compared with the chunkier JST-PH these are 1mm pitch instead of 2mm, but still have a nice latching feel, while being easy to insert and...

Add speedy mega-storage in a jiffy using this 16 GB Class 10 micro-SD card. It comes with a SD adapter so you can use it with any of our shields or adapters! Preformatted to FAT so it works out of the box with our projects. Works great with any device in the Adafruit shop that uses micro-SD...

The official Raspberry Pi PD USB-C power supply is here! Superfast with just the right amount of cable length to get your Pi 5 projects up and running! With true Power Delivery support, this supply can easily supply 5 A of current!Comes in gothy Adafruit Black! Great for use with Pi 4...

Silicone-sheathing wire is super-flexible and soft, and its also strong! Able to handle up to 200°C and up to 600V, it will do when PVC covered wire wimps out. We like this wire for being extremely supple and flexible, so it is great for wearables or projects where the wire-harness has to...

Totaling 380 pieces, this M2.5 Screw Set is a must-have for your workstation. You'll have enough screws, nuts, and hex standoffs to fuel your maker tendencies for days on end! M2.5 size screws fit almost all of the Adafruit breakout/dev board mounting holes...

Every time someone posts on the Adafruit forums and says they need to have a really long cable for their Pi Camera (CSI) or Pi Display (DSI), we say, "Oh you mean like some sort of CSI/DSI cable extender thingy? Yeah we don't have one of those in stock yet" But that time is over!...

This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera (either 'classic' or 'NoIR' type) or Raspberry Pi Display, for a different size. Works great, just carefully open the connector on the Pi and slip this one in.This cable is...

Red and black tinned wires with a 2-pin JST PH connector on the end. 4" / 100mm long. Matches up nicely with our Lipoly chargers!We have the socket 'mating' version of this cable over here,

This cable will let you turn a JST PH 4-pin cable port into 4 individual wires with high-quality 0.1" male header plugs on the end. We're carrying these to match up with any of our boards with 'STEMMA' connectors on them such as the 

Totally 220 pieces, this 2.0mm Pitch Kit with JST-PH Connectors  is a must-have for your workstation. You'll have enough sockets and plugs to fuel your maker tendencies for days on end!These connectors are really common in...