3D Printed Parts
STL files for 3D printing will need to be oriented for printing using FDM machines.
Parts were printed with Gold and Blue Translucent PLA filament.
Note the two halves of the hilt are not identical.
Original design source files may be downloaded using the links below.
You can print your own MagTag case or, as shown on the previous page, buy one from the Adafruit shop.
The dropdown on the Fusion 360 site allows you to pick your preferred 3D file format like STEP, STL, etc.
Page last edited November 05, 2025
Text editor powered by tinymce.
