	Connect Pi Cable Line up the white wire on the ribbon cable with the white arrow on the PiTFT PCB. Press firmly on the connector to plug it into the pins.
	Remove Pi Cable Connector Grab your set of flush cutters and snip off the connector the other end.
	Peel Cable Peel apart each strand of wire from the cable like you would with stringy cheese. Peel it just enough so they're still some ribbon near the fold.

This guide was first published on May 14, 2015. It was last updated on May 14, 2015.

This page (Pi Cable) was last updated on May 08, 2021.

Text editor powered by tinymce.

Pi Cable

Connect Pi Cable