The Pocket Galaxy prints in 3 pieces, with about a 2.5 hour print time.

PocketG_bottom.stl

PocketG_mid.stl

PocketG_top.stl

190°c (PLA)

.2 layer height

1 perimeter

5% infill

no supports

All files can print simultaneously on a 6x6x6 Printrbot Simple Metal bed

The two end pieces will house the electronics and mirrored acrylic, and the NeoPixel strips will be glued into the middle ring.

This guide was first published on Jan 13, 2015. It was last updated on Jan 13, 2015.

This page (3D Printing) was last updated on Dec 31, 2014.

Text editor powered by tinymce.