Wiring the Lights

Save Subscribe
led_strips_Untitled.png

We'll wire the battery pack directly to the Gemma, since the waterproof pack doesn't come with a JST connector attached.  Red goes to VOUT and black goes to G.

The NeoPixels will use the same pads for + (VOUT) and - (G), and the third wire will attach to D1.  

 Frame Lights Code with MakeCode 

This guide was first published on Jun 18, 2019. It was last updated on Jun 18, 2019.

This page (Wiring the Lights) was last updated on Jul 23, 2019.

Text editor powered by tinymce.