The diagram below provides a visual reference for wiring of the components. This diagram was created using the software package Fritzing.

Adafruit Library for Fritzing

Use Adafruit's Fritzing parts library to create circuit diagrams for your projects. Download the library or just grab individual parts. Get the library and parts from GitHub - Adafruit Fritzing Parts.

Wired Connections

  • 5V from LED Strip to 3V on Feather
  • GND from LED Strip to GND on Feather
  • DIN from LED Strip to Pin #6 on Feather
  • Button to Pin #5 on Feather
  • Button to GND on Feather
  • Switch to GND on Feather
  • Switch to EN on Feather


The Adafruit board can be powered via USB or JST using a 3.7v lipo battery. In this project, a 420mAh lipo battery is used. The lipo battery is rechargeable via the USB port on the board. The switch is wired to the enable and ground pins on the board.

This guide was first published on Jul 28, 2020. It was last updated on Jul 28, 2020.

This page (Circuit Diagram) was last updated on Jul 27, 2020.

Text editor powered by tinymce.