Piper Make is a super easy and fun way to make projects with a Raspberry Pi Pico. It uses blocks just like Scratch so you don't need any programming experience to use it. This guide will take you through the steps of setting up your Raspberry Pi Pico for use with Piper Make and show you how to make a macro pad.
Piper Make uses CircuitPython with a helper library. If you want to see how to use the Pi Pico with CircuitPython without Piper, click below:
Please note that at this time, only the Raspberry Pi Pico is supported by Piper Make. At the time of writing, other RP2040 boards like the Feather RP2040 aren't directly supported.