320x240 2.8 inch TFT and Touchscreen installed on Raspberry Pi with desktop showing
Is this not the cutest little display for the Raspberry Pi? It features a 2.8" display with 320x240 16-bit color pixels and a resistive touch overlay. The plate uses the high...
Out of Stock
Angled shot of a GPIO Ribbon Cable for Raspberry Pi Model A and B.
That new Raspberry PiĀ® Model A or B computer you just got has a row of 2x13 pin headers soldered on - those are the GPIO (general purpose input/output) pins and for those of us who...
$2.95
In Stock
Breadboard-friendly SPDT Slide Switch
These nice switches are perfect for use with breadboard and perfboard projects. They have 0.1" spacing and snap in nicely into a solderless breadboard. They're easy to switch...
$0.95
In Stock
Lithium Ion Cylindrical Battery - 3.7v 2200mAh with JST PH connector
Need a big battery for your project? This lithium-ion battery contains a 2200mAh and a protection circuit that provides over-voltage, under-voltage, and over-current protection. Yet,...
Out of Stock
Close up of a PowerBoost 500 Basic - 5V USB Boost @ 500mA from 1.8V+.
PowerBoost is the perfect power supply for your portable project! This little DC/DC boost converter module can run from 1.8V batteries or higher, and convert that voltage to 5.2V DC...
Out of Stock
Adafruit Micro-Lipo Charger for LiPo/LiIon Batt w/MicroUSB Jack connected to battery.
Oh so handy, this little lipo charger is so small and easy to use you can keep it on your desk or mount it easily into any project! Simply plug it via any MicroUSB cable into a USB...
$6.95
In Stock
Classic SNES video game controller.
A third-party SNES (Super Nintendo/Famicom) controller. Works great with Fuzeboxen as well!
$4.95
In Stock
Front shot of JST-PH Battery Extension Cable.
By popular demand, we now have a handy extension cord for all of our JST-terminated battery packs (such as our LiIon/LiPoly and 3xAAA holders). One end has a JST-PH socket, and the...
$1.95
In Stock
Top view shot of a red and black JST PH 2-Pin Cable to Female Connector - 100mm.
Red and black tinned wires with a 2-pin JST PH connector on the end. 4" / 100mm long. Matches up nicely with our Lipoly chargers!
$0.75
In Stock