Wired Connections
The diagram above depicts the connections for the power, audio and gamepad. Use this as a reference for wiring the components. Note, the length of wires and position of components are not exactly how the circuit will be - itās just a diagram to show connections.
The 2.8" PiTFT connects to the Raspberry Pi's GPIO header. A GPIO ribbon cable plugs into the GPIOĀ breakoutĀ of the PiTFT and connects to the PiGRRL gamepad PCB.Ā
PowerBoost 1000c |
PAM8302 Amp |
5V |
VIN |
GND |
GND |
Page last edited January 13, 2016
Text editor powered by tinymce.
