Solder Headers
The shorter side of the plug headers are soldered to the Pico W.
The socket headers are soldered to the PiCowbell board with the socket side pointing up as shown in the picture.
Mount Pico W
Align the board to the USB port opening inside the enclosure. Two of the standoffs feature cutouts to allow the USB port to fit into place.
The Lid is slightly tapered. Press fit the lid with the smaller side onto the the case.
Wall mount
Command hooks are great for easily mounting the case on the wall so you won’t need to drill any holes.
We hope this inspires you to check out Adafruit’s WipperSnapper and the PiCowbell for your next IoT project!
Text editor powered by tinymce.
