OLED

  • OLED STEMMA QT port to PiCowbell STEMMA QT port

DS18B20

  • Sensor GND to PiCowbell GND (blue wire)
  • Sensor Data to PiCowbell GP6 (yellow wire)
  • Sensor VIN to PiCowbell 3V (red wire)
  • 4.7K ohm resistor between 3V and GP6

LED for Party Parrot

  • LED cathode to PiCowbell GND (black wire)
  • LED anode to 220 ohm resistor (white wire)
  • 220 ohm resistor to PiCowbell GP10

Plug in the Pico W

After wiring, plug the Pico W into the PiCowbell. The Pico W USB port should be over the PiCowbell STEMMA QT port.

This guide was first published on Nov 09, 2022. It was last updated on Apr 20, 2024.

This page (Circuit Diagram) was last updated on Mar 08, 2024.

Text editor powered by tinymce.