3D Printed Parts

STL files for 3D printing are oriented to print "as-is" on FDM style machines.

Parts are designed to 3D print without any support material using PLA filament.

Original design source files may be downloaded using the links above.

Slice with Settings for PLA material 

The parts were sliced using CURA using the slice settings below.

• PLA filament 200c extruder
• 0.2 layer height
• 10% gyroid infill
• 60mm/s print speed
• 60c heated bed

Adhere parts

The plates are separated into two parts to prevent having to use any support material. Use glue, such as CA (a.k.a. SuperGlue), to adhere both sides together.